Double Gluer

Characteristics 1: Glue roll: Surface polished, with netted rind on it, inside hole processing, Homeostasis tested. Make sure the gluing is equally and min. Consumption. 2: Glue shaving roll: Surface grinding and chromplated. 3: Surface of other paper axises and paper leading roll are chromplated. 4:Up and down of the paper press roll are pneumatic controlled, the operation is easy and fast. 5:The gap between gluing roll and shaving roll is adjusted by hand. 6: This machine has two models: Independent drive and dependent drive, can choose by customer. 7: Automatic circle glue supplying, can avoid glue subside. 8: Have pre-heating equipment, can accelerate glue gelation. 9: This equipment is easy structure, running on the safe side, has very low problem rate, easy operation, 10:easy maintenance, power cost is low. Technological Parameters: 1. Working width: 1600mm 2. Operation direction: Left or right (design as customer's workshop. ) 3. Design speed: 120m/min. Economic speed: 80-100m/min. 4. Temperature: 150-200`c, Steam Pressure: 1.12-1.3Mpa. 5. Steam consumption: 0.1-0.15MPa, Compress Air: 0.6-0.9Mpa 6. Machine size (L*W*H): 2700mm× 1000mm× 2700mm 7. Paper press model: Press roll model. Diameter of rolls 1. Glue roll: Ø 215 mm, Glue fixing roll: Ø 110 mm. 2. Down Pre-heater roll: Ø 320 mm Up Pre-heater roll: Ø 270 mm. 3. Paper leading paper roll: Ø 86 mm